ModEnc is currently in Maintenance Mode: Changes could occur at any given moment, without advance warning.

Colors

From ModEnc
Revision as of 15:30, 3 December 2016 by TAK02 (talk | contribs) (moved the bottom link to top)
Jump to navigation Jump to search
Tiberian Dawn The Covert Operations Red Alert Counterstrike Aftermath Tiberian Sun Firestorm HyperPatch Red Alert 2 Yuri's Revenge Ares Generals Zero Hour Tiberium Wars Kane's Wrath
Flag: Colors
File(s): rules(md).ini
Values: ERROR – No value types set! Please edit this page and fix the Flag template!

This entry was copied from DeeZire's Red Alert 2 and Yuris Revenge INI Editing Guide for the sake of completeness. As it is not our intention to rip off DeeZire's work, this article is subject to a re-write and update with the latest community knowledge.

For further information, please read Inclusion of The Guide.




NOTE: Bobingabout made an RGB-to-HSB color converter. Get it here: http://bobingabout.gamemod.net/Files/rgb2hsb.exe

This section contains the various colors available to be used when applying the 'remap' logic and usually refer to the colors that objects in the game can be remapped to. Most objects in the game contain an area or areas of color which are drawn in specific palette entries from the UNITSNO, UNITEM and UNITURB palettes. In Red Alert 2, like Tiberian Sun, these palette entries are represented by various shades of red. The colors listed here form an internal table of colors from which the game can remap those shades of red. Each house (country) must be assigned a default Color= from this list. In multiplayer map files, the color of each house already present on the map can be specified which will over-ride the default setting for that house. The three values from each entry here represent the hue, saturation and value of each color. The value component specifies the maximum brightness allowed for the color as the color spread is generated. The hue component remains constant. The saturation curves through color space as the value component changes such that darker colors become more saturated.

Note that this list forms an internal table to which the game refers when any color is required for the games houses (including display of text). The table is numbered in the order in which these colors appear and starts at '0'. When the game needs a particular color, it refers to a number from this table by matching the name, so to edit or change any colors you should change the values held here under that color's name, not the name itself.

In both Tiberian Sun (including Firestorm) and Red Alert 2, the game identifies the colors available in the multiplayer color selection menu by their name on the left side of the table. The colors that will appear in the color selection menu are the ones with the names Gold, DarkRed, DarkBlue, DarkGreen, Orange, DarkSky, Purple and Magenta. They will appear in the dropdown menu in precisely this order, from top to bottom, irrespective of how they are sorted in the color list in the rules(md). Their acctual number in the list does not matter at all, since they are identified by their name, not by the list number. While the appearance of the golden MP color (edited to yellow in RA2) - corresponding to no side in Red Alert 2 - and the appearance of the Soviet color before the Allied one may seem odd in that game, one has to keep in mind that the color array dates back to Tiberian Sun, where GDI - by default associated with a golden remap - was the first side, and Nod - by default associated with a red remap - was the second side. Blue - which represents the Allies in Red Alert 2 - had no corresponding side in Tiberian Sun.

You can change the values of these entries to allow players to use different colors, although it is not recommended that you use Black for a multiplayer house - doing so means the player will not see a lot of in game text which is printed on a Black background!
While in-game colors as appearing in-game are freely editable, there are issues with the acctual color selection menu in both Tiberian Sun and Red Alert 2. In Tiberian Sun, editing the values associated with a color will not change the name of the color as it appears in the color selection menu, although it will alter the color the text is displayed in. For example, editing DarkGreen into a brown color tone will result in the color selection menu containing a brown-colored text reading "Green", which can be selected in order to have the respective house play with a brown color in the acctual game. Red Alert 2 has a distinct, but similar issue in the color selection menu - this game does not acctually have text in the dropdown color selection menu. Instead, it uses little colored squares representing each available color. If the color values are unedited, the color of the squares corresponds to the in-game color which is selected by clicking on them. However, if the color value of a multiplayer color is edited, the colored square in the menu will not change its color to reflect the new values - it will instead keep displaying its default color, which may not correspond to the new color that the option it represents has been changed into.
The game also uses the colors with the name AlliedLoad and SovietLoad to print the loadscreen texts for allied and soviet, respectively, allowing you to edit these aswell.

Contrary to previous information in the community, there seems to be no issue with having more than 50 colors in this list, at least for YR, although the same seems to be supported by research in TS.


LightGold=25,255,255		; 0			Orange

Gold=41,240,230	        	; 1   MP#0		Yellow

LightGrey=0,0,240		; 2			White

Grey=0,0,131			; 3			Grey

Red=20,255,184			; 4			Brown

DarkRed=0,230,255		; 5   MP#1		Red

Orange=25,230,255		; 6   MP#4		Orange

Magenta=221,102,255		; 7   MP#7		Pink

Purple=201,201,189		; 8   MP#6		Purple

LightBlue=119,143,255		; 9			Aqua

DarkBlue=153,214,212		; 10  MP#2		Blue

NeonBlue=185,156,238		; 11			Violet

DarkSky=131,200,230		; 12  MP#5		Periwinkle (i.e. aquaish)

Green=104,241,195		; 13			Bathroom green

DarkGreen=81,200,210		; 14  MP#3		Light green

NeonGreen=0,0,0        	       	; 15			Black

Yellow=38,159,255		; 16			Pastel yellow

AlliedLoad=164,255,255		; 17			Allied Load

SovietLoad=0,235,255		; 18			Soviet Load

(YR) Purple2=211,201,189	; 19			Yuris Purple #1

(YR) Purple3=191,201,189	; 20			Yuris Purple #2


Purely for information, the UNITSNO and UNITTEM palettes in Red Alert 2 are almost identical to the Tiberian Sun ones, so here are some more colors from Tiberian Sun should you wish to modify the default colors, as they work equally well in Red Alert 2.

LightGold=34,128,255
Gold=34,160,255
DarkGold=34,235,255
LightGrey=0,0,220
Grey=0,0,190
DarkGrey=0,0,120
Black=0,100,0
White=0,0,255
LightRed=0,70,255
Red=0,160,255
DarkRed=0,235,255
Burgandy=0,255,150
LightOrange=24,165,255
Orange=24,255,255
DarkOrange=11,235,255
LightMagenta=228,120,255
Magenta=228,160,255
DarkMagenta=228,235,255
LightPurple=200,160,255
Purple=200,235,255
HyundaiPurple=200,235,170
LightBlue=164,140,255
Blue=164,200,255
DarkBlue=164,200,179
NeonBlue=164,255,255
LightSky=142,70,255
Sky=142,160,255
DarkSky=142,235,255
LightCyan=132,70,255
Cyan=132,160,255
DarkCyan=132,235,255
LightTeal=110,70,255
Teal=110,160,255
DarkTeal=110,235,255
LightGreen=85,70,255
Green=85,160,200
DarkGreen=85,235,150
NeonGreen=85,255,255
LightYellow=43,70,255
Yellow=43,160,255
DarkYellow=43,235,255
NeonYellow=43,255,255
LightPeach=21,120,255
Peach=21,150,255
DarkPeach=21,180,255
DarkerPeach=21,255,255
LightLime=53,70,255
Lime=53,160,255
Darklime=53,235,200
NeonLime=53,235,255

Retrieved from "https://modenc.renegadeprojects.com/index.php?title=Colors&oldid=20252"